Hot Wheels 2008

1/36 Welly Toyota Celica Seventh generation / T230 series (1999–2006)

In late 1999, Toyota began production and sales of the seventh generation Celica. It closely resembled the XYR concept with the exception of the front bumper and rear spoiler. The 2000 model year Celica was an element of Toyota Project Genesis, an effort to bring younger buyers to the marque in the United States. Toyota wanted to appeal to the same buyers of the Acura Integra and Honda Civic. Toyota took time to lighten the car and lower cost whenever possible. Power window and door lock controls were placed in the center console so only 1 set was necessary for both doors. Initial moonroofs were made of polymer plastic instead of the traditional glass.
The Celica came in two different models. The ZZT230 was powered by a relatively economical 1.8 L 4-cylinder 140 hp (104 kW) 1ZZ-FE engine and the ZZT231 powered by a higher-performance 1.8 L 4-cylinder 190 hp (142 kW) (in Europe and Japan) 2ZZ-GE version, co-developed with Yamaha, the latter featuring a two-step variable valve lift control in conjunction with its variable valve timing. In 2004, CNNMoney.com rated the Celica as one of the best cars to purchase for gas mileage.[1]
Exporting of the Celica ceased in July 2005. However until mid-May, customers could still order one, although it was advised they took action before that time ended. Outside of Japan, the Celica received a small restyling with new bumpers and headlamps, continuing its sales.
The last Celica was rolled off production line on April 21, 2006. In its last year, the Celica was only officially sold in Japan.

reference: wikipedia

Hot Wheels 2011

Thank you for clicking our sponsors and ads

Saico 1/36 2007 Hummer H3

The Hummer H3 was a crossover SUV/Sport Utility Truck from General Motors' Hummer division introduced in 2005 based on the GMT355 underpinning the Chevrolet Colorado and GMC Canyon compact pickup trucks. Produced at GM's Shreveport, Louisiana factory and the Port Elizabeth plant in South Africa the H3 was the smallest of the Hummer models, and the first to be built by GM. It was available either as a traditional midsize SUV or as a midsize pickup known as the H3T.
The H3 features a two-speed, electronically controlled full-time four-wheel drive system that is suitable for both on-road and off-road driving in all conditions, with electronic locking front and rear differentials optionally available. Like its larger sibling the Hummer H2, the H3 can ford 24 inches (610 mm) of water (tested in depths up to 31 in/790 mm) at a speed of 5 miles per hour (8.0 km/h) and 16 inches (410 mm) of water at a speed of 20 miles per hour (32 km/h). Standard ground clearance is measured at 9.7 inches (250 mm) while the approach, departure, and breakover angles are measured at 37.4°, 34.7°, and 22.1° respectively, allowing the H3 to scale a 16-inch (410 mm) vertical wall and negotiate grades of 60% and side slopes of 40%. Though fore and aft recovery hooks are standard, a trailer hitch and wiring harness are optional.

Maximum towing capacities are 3,000 pounds (1,400 kg) for the straight-5 with manual transmission, 4,500 pounds (2,000 kg) for the straight-5 with automatic transmission, and 6,000 pounds (2,700 kg) for the V8 with automatic transmission. Cargo volume with the second-row seats in the upright position is 25.0 cubic feet (0.71 m3), which expands to a maximum of 62.8 cubic feet (1.78 m3) when the seats are folded down. V8 models feature the lightest maximum payload capacity of just over 1,100 pounds (500 kg) while straight-5, manual transmission models allow the greatest payload at 1,300 pounds (590 kg).

reference: wikipedia